Yesterday I picked up a set of Gamecraft players and puck catcher from Rod Hockey Shop
Great guys and service. They have all kinds of replacement parts and players for Gamecraft and Sportscraft tables.
Check them out!
Yesterday I picked up a set of Gamecraft players and puck catcher from Rod Hockey Shop
Great guys and service. They have all kinds of replacement parts and players for Gamecraft and Sportscraft tables.
Check them out!
I just today used gimp to “photoshop” the graphics to the scale of my scoreboard. Quite easy learning curve on this program.
Thanks to http://canuckfanatic92.tumblr.com for most of the graphics.
I am still going to be adding a home/away and time labels to the front part as well as another action picture.
Check back soon!
I have attached the scoreboard to the PVC pipe that I attached to the sides of the table. I used 1.25 inch diameter pipe and 90° elbows for the corners. To attatch the pipes to the table I used 2 bolts. To strap the scoreboard to the pipe I used 2 1.25 inch pipe brackets. I placed underneath those a half inch bolt spacer so that I can have access to the control panel on the top of the board.
Looking forward to using this at my fantasy football draft coming up in August!
I have finished the ads on the boards for the table. I used Gimp to edit the logos and printed them using a laser printer. I then glued them on with a spray glue from Walmart. You can find this spray at any hardware or craft store.
I then used red electrical tape for the top trim on the boards and covered all the wood with it that was showing from when I shortened the boards. It looks fantastic. I still need to find some thin yellow electrical tape I can use for the bottom.
I added the glass for now to just see how it will look.
I have begun cutting the glass. All I’m using is a ruler and an x-acto knife. I score the plexiglass 5-7 times, then bend the glass till it snaps. Make sure you watch for shards and bend it away from your face. It’s as sharp as glass. Keep looking for updates!
Keep in mind the glass is not in yet, I simply slipped the glass in the slot.